new holland bush hog
Somerset Farm Equipment
Somerset Farm Equipment
Somerset
606-678-8804
913 E. Mt. Vernon St.
Somerset, KY 42501
Call Us
Directions
Browse Inventory »
Online Parts »

New Holland H7330

Showroom / New Holland Ag / Hay & Forage / Discbine Disc Mower-Conditioners / H7330

Double tap to zoom

 

Features

H7230 AND H7330
These two models make a 10' 4'' cut and require only 80 PTO horsepower for operation. H7230 mowers offer the choice between a chevron-style intermeshing steel or rubber roll conditioning system, while the H7330 is equipped with the LeaningEdge flail system. A curved tongue with a clevis hitch is featured on both models. Looking to make sharper turns? A two-point swivel hitch or drawbar swivel hitch (shown) are also available to provide 90° turns while eliminating tire scuffing and making headland turns easier. The swivel gearbox maintains the PTO angle straight through the turn, eliminating constant velocity joints and extending driveline life and reliability.

Specifications

H7330
New Holland-Disc Cutterbar
Type MowMax™ True Modular Disc Cutterbar
Width of Cut, ft. in. (m) 10' 4" (3.2)
Number of discs 8
Number of knives 16 (2 per disc)
Disc Speed, rpm 3000
Cutting angle 2 to 10 degrees
Hydraulic Cutting angle control Standard
Standard Cutting height skid shoe, in. (mm) Standard 0.95 to 3.2 (24 to 81)
Fixed Raised, high-stubble skid shoe Optional  2.25-4.5 (57-114)
Adjustable Raised, high-stubble skid shoe -
BioMass skid shoe -
Ground clearance with header fully raised, in. (mm) 17" (432)
Cutterbar Flotation Vertical and lateral, adjustable springs
QuickMax™ Knife Change System -
ShockPro™ Disc Drive Hub protection system Standard
MowMax™ 3-year cutterbar protection plan Standard
Chevron-Design Roll Conditioner
Chevron-Design Roll Conditioner -
Type. -
Roll Length, in. (mm) -
Roll Diameter, in. (mm) -
Roll Drive -
Roll Speed, rpm -
Roll Pressure System -
Conditioner Intensity Adjustment -
LeaningEdge™ Flail Conditioner
LeaningEdge™ Flail Conditioner Standard
Number of LeaningEdge flails 100
Semi-Swinging LeaningEdge flail design Standard
Rotor Diameter, in. (mm) 22 (560)
Standard Speed, rpm 1000
Optional Slow Speed, rpm 718
Drive. 4 HB V-belt
Conditioner Intensity Adjustment. Single crank adjustable rotor hood
Optional Textured Hood Liner Kit Optional
Attachment
Standard Drawbar Optional
Drawbar Swivel Hitch Optional
2-pt Swivel Hitch Optional
Dimensions
Height, Transport, ft. in. (m) 5' 8" (1.7)
Height, Operating, ft. in. (m) 4' 5" (1.3)
Width, Transport, ft. in. (m) 11' 3" (3.4) with standard drawbar hitch
Width, Operating, Std. Drawbar Hitch, ft. in. (m) 16' 0" (4.6)
Width, Operating 2-pt Swivel Hitch, ft. in. (m) -
Width, Operating Drawbar Swivel Hitch, ft. in. (m) -
Length, Transport, Standard Drawbar Hitch, ft. in. (m) 17' 7" (5.3)
Length, Transport, 2-pt Swivel Hitch, ft. in. (m) 20' 3'' (6.2)
Length, Transport, Drawbar Swivel Hitch, ft. in. (m) 20' 3'' (6.2)
Length, Operating, Standard Drawbar Hitch, ft. in. (m) 17' 8" (5.4)
Length, Operating, 2-pt Swivel Hitch, ft. in. (m) 19' 10" (6.0)
Length, Operating Drawbar Swivel Hitch, ft. in. (m) 19' 10" (6.0)
Weight, Operating lbs. (kg) 4,065 (1844)
Drive
Drive 540 rpm PTO, enclosed gears and four HB belt
Drive Protection
Drive Protection Slip clutch and over-running clutch
Hydraulics
Hydraulic swing Standard (double-acting cylinder)
Operating Position Side-Pull, Right Side
Hydraulic lift Standard (operated by two single-acting cylinders; master/slave)
Hydraulic tilt Optional (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge
Swath, ft. (mm) 7 (2134)
Windrow, ft. (mm) Adjustable from 3 to 7 (914 to 2134)
Wide Thin Fin Kit (100 % Coverage) Optional
Speeds
Operating, mph (kph) 0 to 9 (0 to 14.5)
Transport, mph (kph) 20 (32)
Tractor Requirement
Tractor Requirement 80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar.
Hydraulic valves All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires
Size 9.5L x 14 6PR