Call UsBush Hog 4815
4815 Flex-Wing Rotary Cutters 4815
Overview:
Cutting Width: 15 ft.
Cutting Capacity: 4.5 in. diameter
Minimum Tractor HP: 70 HP
Features
Construction Features
- Heavy structure on center section and wings.
- Wing skids are 3/8” thick with an outside angle of 45 degrees to stop “ground dig-in” during turns.
- All axle spindles are half shafts for quick and less costly maintenance.
- Center section blades align closely with outside center tires to closely cut out the bottom of ditches.
- Grease fittings and spring steel bushings are at axle pivot points for longer life.
- Each cutting gearbox has a 3 inch output shaft with more and deeper splines than competitor models for maximum torque load capabilities.
- All drivelines are EZ lube with grease points aligned and the cross bearing fitting is in the end cap.
Safety Features
- Highway Safety Lights Standard
Specifications
| Model | 4815 |
| Transport Height | 7 ft., 3 in. |
| Splitter Gearbox | 250 H.P. |
| Gear Box Warranty | 6 years |
| Transport Width | 8 ft., 2 in. |
| Cutting Gearbox | 225 H.P. |
| Cutting Width | 15 ft. |
| Cutting Height | 2 in. to 14 in. |
| Cutting Capacity | 4.5 in. diameter |
| Blade Tip Speed | 16,000 FPM |
| Hitch | Perm-level or ball type |
| Minimum Tractor PTO | 70 H.P. |
| Top Deck Center Section | 11 ga. |
| Side Band | 1/4 in. x 12 in. |
| Bottom Deck Center Section | 7 ga. |
| Deck, Wings | 7 ga. |
| Blades | 1/2 in. x 4 in. |
| PTO Drivelines | ASAE Cat 6 |
| Wing Drivelines | ASAE Cat 5 |
| Wing Adjustment | Turnbuckles |
| Wing Flex | 22° down / 87° up |
| Wing Fee Float | 22° down / 45° up |
| Axle Cushions | Springs at each wheel |
| Safety Tow Chain | Standard |
| Highway Safety Lights | Standard |