Bush Hog 3810
Features
Performance Features
- Wing skids are 3/8” thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the side-bands.
- Center section blades properly align with center wheels to closely cut out the bottom of ditches.
- Grease fittings and spring steel bushings at axle pivot points for longer life.
- Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
Construction Features
- Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.
- The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
- Bush Hog’s E-Z lube drive-lines are quick and easy to service. All grease fittings on the pto CV drive-line and wing drive-lines align for quick location of grease points. Since all grease fittings on all drive-lines are in an up position on every 5th revolution, service times are reduced.
Safety Features
- Highway safety lighting is standard.
Product Features
Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.
The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.
Specifications
Model | 3810 |
Cutting Width | 10-feet 6-inches |
Cutting Height | 2-inches to 14-inches |
Hitch | Perma-Level or Ball Hitch |
Minimum Tractor PTO HP | 60HP |
Side Band | 1/4 In. x 12 in. |
Blade Pan | Round, replaceable, bolt-on |
PTO Driveline | EZ Lube ASAE CAT6, CV |
Wing Drivelines | EZ lube, ASAE Cat. 5 |
Wing Flex | 22 degrees down/87 degrees up |
Wing Free Float | 22 degrees down/45 degrees up |
Splitter Gearbox Rating | 250 HP |
Cutting Gearbox Rating | 225 HP |
Gearbox Warranty | 6 Years |
Blade Tip Speed | 16,000 feet per minute |
Cutting Capacity | 4 1/2 in. |
Top Deck Center Section | 11 ga. |
Bottom Deck Center Section | 7 ga. |
Deck, Wings | 7 ga. |
Axle Cushions | Spring at each wheel |
Main Axles, greaseable with bushings | 3/8 in. wall tube |
Axle Arms, greaseable with bushings | 3 1/2 in. x 3 1/2 in. |