Bush Hog 3210 Offset

Features
Performance Features
- 3210 Series comes in a Lift, Pull, Semi-Mount & Offset Model
- Rubber Element Cross Shafts
- Heavy Duty Cushioned Axles
- Two Round Blade Holders
- See Specifications Page For Models 3210 & 3210 Offset
Construction Features
- 10-gauge Deck Construction
- 7-gauge Strongbacks
- 1/4-inch Sidebands
- Rubber Cushioned Axle Arms
- 5 Year Gearbox Limited Warranty
- Powder Coat Paint
Product Features
All Bush Hog® Multi-Spindle rotary cutters feature structural steel bracing and reinforced welding at all high stress points. Streamlined deck design inhibits trash and water buildup problems.
Shields over all cross shafts fold conveniently out of the way to allow quick access to clutch or universal joints.
Special rubber-cushioned axle arms reduce shock loads during operation and transport.
A wide angle, constant velocity driveshaft on pull models relieves the PTO working angle. This reduces vibration and allows smoother cutting in sharp turns.
Specifications
Model | 3210 Offset |
Cutting Width | 10-feet, 6-inches |
Cutting Capacity | Up to 3-inches |
Cutting Height | 2 to 13-inches |
Dimensions (width x Length) | 11-feet, 1-inch x 13-feet, 5-inches (Pull) |
Type Hitch | Pull Type (Self-Leveling); (7-feet, 10-inches Offset Beyond Tractor Center Line) |
Deck Thickness | 10-gauge |
Side Bands | 1/4-inch x 10-inches |
Minimum Tractor HP | 50 PTO |
Driveline | ASAE Category 5 |
Cross Shaft | ASAE Cat. 5 Rubber Element |
Gearbox HP | (3) 210 Main and 205 Outboard |
Tractor PTO Speed | 540 RPM |
Driveline Protection | 4 Plate PTO Slip Clutch |
Height Adjustment | Manual or Hydraulic |
Blade Holder(s) | Round |
Blades | 1/2-inch x 4-inches - Uplift |
Blade Tip Speed | 16,881 FPM/540 RPM;17,400/1,000 RPM |
Blade Overlap | 3-inches |
Tires | Laminated, Airplane |
Axles | Rubber Cushioned; Choice of Single or Dual Axle |
Deflectors | Selection: Front Chains and Rear Bands or Chains |
Safety Tow Chain | Standard |
Approximate Weight | (Pull with Single Axle) 2,624-lbs. |