Bush Hog 1815
Features
Performance Features
- Axle spindles are in halves for quick and economical service.
- Center section blades closely align with center section wheel to better cut the bottom of ditches.
- Grease fittings and steel bushings at axle pivot points for extended life at pivot areas.
- Wing free float without movement of wing hydraulic cylinder rod extends cylinder life.
- Optional distribution baffles spread grass and cornstalks to eliminate windrows.
- Improved wing design results in a clean top and no exposed structure underneath.
Construction Features
- Each axle arm on the center section has a rubber cushion to absorb the shock loads near the wheel.
- Patented oil sight gauge in all three cutting gearboxes for quick and easy monitoring of oil level.
- Bush Hog’s E-Z lube drivelines are quick and easy to service.
- All grease fittings on the PTO CV driveline and wing drivelines closely align for quick location of grease points.
Product Features
Wing free float is 22° down and 25° up without movement of hydraulic cylinder rod for extended cylinder life.
Each axle arm on the center section has a rubber cushion to absorb the shock loads near the wheel.
Patented oil sight gauge in all three cutting gearboxes for quick and easy monitoring of oil level.
Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines closely align for quick location of grease points.
Specifications
Model | 1815 |
Cutting Width: | 15 ft. |
Cutting Height: | 2-inches to 14-inches |
Hitch | Perma-Level or Cast Clevis |
Minumum Tractor PTO H.P.: | 60 |
Side Band: | 1/4″ x 12″ |
Blades: | 1/2″ x 4″ Parallel lift |
Blade Holder: | Round, 7 ga. |
PTO drivelines: | 540, ASAE Cat 6 • 1000, ASAE Cat 5 |
PTO Driveline Support: | Standard |
Wing Drivelines: | ASAE Cat 4 |
Wing Flex: | 22° Down to 87° up |
Wing Free Float: | 22° down to 25° up |
Splitter Gearbox Rating: | 160 HP |
Cutting Gearbox Rating : | 130 HP |
Gearbox Warranty: | 5 Years |
Blade Tip Speed 540 / 1000: | 15,000 FPM / 15,600 FPM |
Cutting Capacity: | 2 1/2″ Diameter |
Deck Center: | Single, 10 ga. |
Deck Wing: | Single, 10 ga. |
Axle Cushions, Center: | On Each Center Axle Arm |
Wing Adjustments: | Heavy Duty Turnbuckle |
Grass/ Crop Distribution: | Optional Baffles |
Safety Tow Chain: | Standard |
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. |
---|